Panasonic HDC-TM55P Operating Instructions Manual page 23

Copying between SDcardandBuilt-in Memory/
HDD[HDC-TM55/H DC-TM60/H DC-HS60]
I VIDEO IIPHOTO I
Motion pictures or still pictures recorded with this unit can be copied between an SD card
inserted in this unit and a built-in memory/HDD.
• Confirming remaining capacity on the copy destination
[MEDIA STATUS] (-) 49) allows you to confirm how much capacity remains on the SD card,
built-in memory or HDD.
• If the remaining capacity on a single SD card is not enough, you can copy to multiple SD
cards following the instruction on the screen.
In this case, the last scene copied to an SD card is automatically divided to fit the space on
the SD card.
• If you divide the scenes (-) 88), and copy by scene selection, it is possible to copy
matching the remaining capacity of the media, or only the necessary parts.
• If there is not much remaining capacity in the SD card, a confirmation message asking to
copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot
be restored.
• Refer to page 100 for approximate time for copying.
1
Change the mode to [].
• Use a sufficiently charged battery or the AC adaptor.
2
Select the menu.
:[COPY] ]
_/_
[ _'_l] When €opying from the built-in memory to the SD card
[ m ,_ [_ ] When copying from the SD card to the built4n memory
• When there are relay-recorded scenes in the built-in memory, a message appears on the
screen. Touch [YES] and copy after combining relay recorded scenes to the SD card.
(-_ 92)
[_}_ m ] when Copying from the HDD to the SD Card
[ m_O] When copying from the SD card to the HDD
99
VQT2M51