Adjusting The Loading Position - Epson Stylus 800 Series User Manual

Adjusting the loading position

The loading position is the position of the paper when the
printer loads it from the paper feeder or the manual feed slot. If
printing is too high or low on the page, you can change the
loading position with the micro-feed feature as follows:
Load/Eject button, or from the manual feed slot by
inserting it into the slot.
and press the Economy/Condens.ed button to move the
loading position up l/180 inch, or the Font button to move
the loading position down 1 / 180 inch. Continue pressing
the appropriate buttons until you reach the position you
want.
The pointer on the print head indicates the base line of printed
characters. (You may have to experiment a few times to get the
results you want.)
se the paper feeder cover.
pointer
Using Other Printer Functions 2-9