Normal Video Recording
To burn video fi'om a video device such as a VCR or DVR onto a disc, connect
the device to the DVDirect
via an S-video or AV cable. Operate the video
device to play back the portion you want to record, and use the {_) (Record)
and @ (Stop) buttons on the DVDirect to record. You call use the same
operation to record fi'om a DV camcorder connected to the DVDirect
via a DV
(i.LINK) cable.
Press the @ (Power)
button to turn on the DVDirect.
A message prompting
you to insert a disc appears ill the display window.
Insert a disc (page 17).
The DVDirect starts reading the inserted disc.
Turn on the camera
or video device,
and set it to playback
mode.
For most cameras, switch the power/mode
button to the playback, PLAY/
EDIT, or VTR mode to play the tape or perform recording.
For details,
refer to the operating
instructions
for your camera.
Connect
the camera
or video device
to the DVDirect.
When connecting
a DV camcorder
using a DV (i.LINK) cable
Connect the camera's
DV connector to the DVDirect's
DV IN connector
using a DV (i.LINK) cable (not supplied).
DV (i.LINK)
cable (not supplied)
When connecting
a video device using an AV or S-video cable
Use an AV or S-video cable (both not supplied) when connecting a video
device such as a VCR or DVR to the DVDirect.
Regardless
of which
ol the two cables
is used,
recording
is always
perlermed
with
normal
video recording.
42