Safety Regulations - Sony DVDirect VRD-MC3 Operating Instructions Manual

Safety
Regulations
You are cautioned thai any changes ur
modifications nut expressly approved in this
manual could w)id your authority to operate
this equipment.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To avoid electrical shuck, do nut open the
cabinet. Relbr servicing to qualified persouuel
ouly.
CAUTION:
As tile laser beam in tile VRD-MC3 is harmlid
to the eyes. do not attempt to disassemble tile
cabinet. Reler servicing to qualified persouuel
ouly.
The use of optical instrumeuts with this
product will increase eye hazard.
The use of controls or adjustments or
perlormauce of procedures other than those
specified herein may result in hazardous
radiation exposure.
The VRD-MC3 is classified as a CLASS 1
LASER PRODUCT.
The CLASS 1 LASER PRODUCT notice is
located on tile enclosure.
Bei diesem VRD-MC3 handelt es sich um eiu
Laser-Prudukt der Klasse 1.
Das Etikett mit der Aufschrift LASER
KLASSE I PRODUKT befiudet sich auf dem
Geh_iuse.
CLASS1
LASER PRODUCT
LASER KLASSE1
PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
FCC Compliance:
This equipment has been tested and found to
comply with tile limits tbr a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are desigued to provide
reasonable protection against harmful
iuterference iu a residential installation. This
equipment generates, uses, and can radiate
radio fl'equency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is uu
guarantee that interference will uot occur in a
particular iustallation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and uu, the user is
encouraged to try to correct the interlerence by
one or more of the following measures:
• Reurieut or relocate tile receiving antenna.
• Increase tile separation between the
equipment and receiver.
• Cuunect the equipmeut into an uutlet on a
circuit diflereut 1?'orethat to which tile
receiver is comlected.
• Consult the dealer or an experienced radio/
TV technician fur help.
The shielded interlace cable recommended in
this manual must be used with this equipment
in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC
Rules.
Notes:
If you have any questions about this pruduct,
visit the user support web site listed in
"Support Overview" on page 82. The
telephone number below is not fur customer
service but only fur official purposes.
Declaration of CunR_rmity
Trade Name: SONY
Model No.: VRD-MC3
Respuusible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo.
San Diego. CA 92127
U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is sut_ject tu the lk_lluwing two
cunditiuns:
( I ) This device ma} not cause harmful
interlbreuce, and
(2) This device must accept an_ interference
received, including interference that may
cause undesired operation.
2