Table of Contents
Advertisement
Figure E-7. Feeding the paper into the printer
Next, pull the paper up until the top is above the pin-feed
holders. Fit the holes on the left side of the paper over the pins in
the left holder and close the cover. Now fit the right side of the
paper in the right holder, moving the holder as needed to match
the width of the paper. Close the second cover-making sure
that the paper has no dips or wrinkles-and lock the right holder
in place.
Adjust the paper guide skids on the back of the tractor so
they're evenly spaced. The paper pressure bar should remain in
the open position and does not touch the paper.
Now you're ready to set the top-of-page position. Turn the
paper-feed knob to advance the paper until the perforation be-
tween the first and second sheets is about l/8 of an inch below
the top of the print head as shown in Figure E-8.
E - 6
Advertisement
Table of Contents
