Brother MFC-8710DW Quick Setup Manual page 17

USB
d
Follow the on-screen instructions until this
screen appears.
e
Connect the USB cable to the USB port
marked with the
and then connect the cable to your computer.
f
Turn the machine on.
The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
®
For Windows Vista and Windows
when the Windows Security screen appears,
click the check box and click Install to complete
the installation correctly.
g
When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
h
When the Setup Complete screen appears,
check the box of the action you want to
perform, and then click Next.
symbol on your machine
®
7 users,
21
Finish and restart
a
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
Note
• If an error message appears during the
software installation, run the Installation
Diagnostics located in
Start/All Programs/Brother/MFC-XXXX
(where MFC-XXXX is your model name).
• Depending on your security settings, a
®
Windows Security or antivirus software
window may appear when using the machine or
its software. Please allow or permit the window
to continue.
The installation is now
Finish
complete.
Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver for Windows Vista
®
Windows 7 when printing from applications that
use the XML Paper Specification. Please
download the latest driver by accessing the
Brother Solutions Center at
http://solutions.brother.com/.
®
Windows
®
and
17