Installing And Removing A Processor; Installing A Processor; Unlatch The Socket Lever - Intel DP67DE Product Manual

Installing and Removing a Processor

Instructions on how to install the processor on the Desktop Board are given below.

Installing a Processor

CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 3 on page 23). Failure to do so could damage the processor and the
board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 25.
2. Unlatch the processor socket lever by pushing it down and away from the socket
(Figure 6, A, B).
Installing and Replacing Desktop Board Components
Figure 6. Unlatch the Socket Lever
29