Epson Pro XL Installation And Operation Manual page 15

Select FILE.
7.
Then select OK. The program installation is now
8.
complete. PowerRIP must be registered before you
can use it. Go to the section Registering your
Software.
9. When you print from an application it will ask you for
a file name. You can use almost any name but you
must print to C:\BIRMY directory or the drive letter
where PowerRlP was installed.
Note: When printing under Windows 3.11, PowerRlP
does not return user operation until printing is fin-
ished.
Birmy Graphics Corporation
11