Removing the Shipping Restraints
1. Open the access cover and remove the printhead shipping
retainer and the pull-up roller shipping retainer.
2. Remove the pull-up roller, then lift the paper separator
and remove the shipping retainer. Replace the pull-up
roller.
Note: Save the shipping retainers and the packing material
in case you ever need to ship the printer.
Read Me First
Installing the Ribbon Cartridge
1. Make sure the printer is turned OFF.
2. Centre the printhead ( ).
3. Unpack the ribbon cartridge.
Ribbon shield
Grip points
Take-up knob
3