HP StorageWorks P9000 User Manual page 61

Table 17 Volume list
Field
Message
P-VOL
MU
Status
S-VOL
CTG
SvolMode
Copy Pace
Sync
Emulation
Capacity (MB)
Description
A message displays when there is no volume or pair to display. If you see the message in
the Volume List, click a different icon in the Tree on the left area of the Pair Operation
window.
P-VOL information displays in AAA-BB-CCC(XX:YY:ZZ) format.
AAA is the port ID (cluster and channel number)
BB is the group number of host group
CCC is the LU number
XX:YY:ZZ is the LDKC number:CU number:LDEV number
The MU number of the Business Copy pair formed with the P-VOL. MU#s are mirror unit
numbers. The storage system assumes the same numbers of P-VOLs as S-VOLs. For example,
when a P-VOL is paired with three S-VOLs, though just one P-VOL exists, the system assumes
that there are three P-VOLs. These "virtual" P-VOLs are mirror units, MUs.
Pair status is displayed.
S-VOL information displays in AAA-BB-CCC(XX:YY:ZZ) format.
AAA is the port ID (cluster and channel number)
BB is the group number of host group
CCC is the LU number
XX:YY:ZZ is the LDKC number:CU number:LDEV number
Only one path is listed, even for LUs with more than one. The path is connected to the first
port configured for the path.
The S-VOL's consistency group number. If no consistency group is set for the S-VOL, dashes
(---) display.
SvolMode. Indicates whether the S-VOL can be written to and/or read, or not.
W indicates S-VOL Write. S-VOL pair status is PSUS(SP) or PSUS, and the host writes
to the S-VOL.
N indicates Hlde Mode: The S-VOL cannot be read in this mode.
If both S-VOL-write and Hlde modes are on, W displays. If both modes are off, a dash (-)
displays.
Indicates the speed that data is copied according to the pair status.
Slower, Medium, or Faster displays if the pair status is COPY(PD), COPY(SP), PSUS(SP),
COPY(RS), or COPY(RS-R).
Dashes (----) display if the pair status is none of the above.
Note: When you create Business Copy pairs by using RAID Manager, the copy pace is
set as follows.
When the track size is 1 or 2, Slower is set.
When the track size is 3, Medium is set.
When the track size is 4 to 15, Faster is set.
Indicates the percentage of pair synchronization, if applicable, according to the following
pair statuses.
For SMPL, PSUE, and SMPL(PD), dashes (----) display.
For COPY(PD), COPY(SP), and PSUS(SP), the percentage of copied data displays.
For PAIR, PSUS, COPY(RS), and COPY(RS-R), the percentage of identical data in the
P-VOL and S-VOL displays.
The volume's emulation type.
The volume's storage capacity displays in megabytes.
Pair Operation Window 61