Hp P6000 Replication Solutions Manager Host Agent Support - HP EVA P6000 Reference

4.3 HP P6000 Replication Solutions Manager host agent support

This table describes HP P6000 Replication Solutions Manager host agent support for:
— Volume Manager
— Mounting host volume copies on the same host
— Multipath solutions
— Cluster software
NOTE: The information in this table is specific to what has been qualified with the HP P6000 Replication Solutions Manager host agent software. It may contain version information that conflicts
with the array/operating system support listed on the Single Point of Connectivity Knowledge (SPOCK) website. To access SPOCK, see Table 7.0. Use the information in this table specifically for
HP P6000 Replication Solutions Manager host agent environments.
Supported Volume
Host operating
1
system Manager
11.23: Native Logical
Volume Manager and
Veritas Volume Manager
HP HP-UX (VxVM)
11.31: Native Logical
Volume Manager 1.0,
2.0
HP OpenVMS NA
HP Tru64 5.1b-4
Native Logical Volume
IBM AIX Native Logical Volume
Replication and DC-
Management of
Windows dynamic disks
Microsoft Windows 2003
and VERITAS Volume
Manager are not
supported
DC-Management of
Windows dynamic disks
Microsoft Windows 2008 and Veritas Volume
Manager are not
supported.
1
If a volume group spans more than one storage system, HP P6000 Replication Solutions Manager only supports replication of volume groups spanning storage systems with the same controller
software version.
2
Mounting a host volume copy on the same host as the source is supported with HP P6000 Business Copy and HP P6000 Replication Solutions Manager.
3
These solutions apply to HP P6000 Continuous Access in general.
4
With Veritas Volume Manager, this action requires a minimum of version 5.0 and is subject to specific disk layout versions as specified in Veritas documentation.
5
If you use Pvlinks and require multiple paths to a host volume, you must create the additional paths after the host volume is created. See the HP P6000 Replication Solutions Manager User Guide
or HP P6000 Replication Solutions Manager Administrator Guide for more information.
6
P6000 DC-Management is not supported on cluster-aware disks and volume groups.
7
Replication of Advfs volumes on disks is supported, but replication of LSM volumes is not supported.
8
DC-Management is supported on cluster-aware disks. The cluster name in the HP P6000 RSM job name is only supported on Windows 2003.
Compatible multipath solution
Mounting a host
volume copy on
EVA4000/6000/8000
the same host as
EVA4100/6100/8100
2
the source EVA6400/8400
11.23: Secure Path 3.0F SP4,
5
PVlinks
4
Y
(no VERITAS DMP)
11.31: Native multipathing
Y Native multipathing software
7 Y
Native multipathing software
MPIO 1.0.0.x or 1.0.1.x
(AntemetA basic HP P6000
N
Business Copy support only,
no host agent support)
HP MPIO full featured DSM for EVA 4.0.0 or 3.02.0x
Y, except dynamic
disks or copies of
Windows Cluster
Quorum disks in the
HP MPIO full featured DSM for EVA 4.01.00 or 3.02.0x
same cluster
HP MPIO full featured DSM for EVA 4.02.00 (HP P6000
RSM 5.3 on Windows 2008 R2 SP1 for P6300 EVA
3
Supported cluster
EVA4400
software
P6300/P6500 EVA
11.23: Autopath/
Secure Path 3.0F SP4
Serviceguard
11.31: Native
multipathing
Native cluster
software
Not supported TruCluster
MPIO 1.0.1.0
HACMP 5.3
(MPIO beta version)
Microsoft Cluster
Server
only)
26
Supported file Cluster
systems aware
6 HFS, VxFS N
ODS-2, ODS-5 N
UFS,
N
Native AdvFS
JFS N
9
NTFS, FAT32 Y