HP EVA P6000 Reference page 5

Compatibility reference
Hide thumbs Also See for EVA P6000:
Table of Contents

Advertisement

2.0 HP P6000 Command View interoperability support
This table lists the controller software and layered applications that are supported with HP P6000 Command View.
– HP Command View EVA 9.2 includes HP Command View EVA 9.2 for server-based management and array-based management, HP Command View EVAPerf 9.2, SMI-S EVA 9.2, and SSSU 9.2.
– HP Command View EVA 9.2.1 includes HP Command View EVA 9.2.1 for server-based management and array-based management, HP Command View EVAPerf 9.2, SMI-S EVA 9.2, and SSSU 9.2.
– HP Command View EVA 9.3 includes HP Command EVA View 9.3 for server-based management and array-based management, HP Command View EVAPerf 9.3, SMI-S EVA 9.3, and SSSU 9.3.
– HP P6000 Command View 9.4 includes HP P6000 Command View 9.4 for server-based management and array-based management, HP Command View EVAPerf 9.4, SMI-S EVA 9.4, and SSSU 9.4.
– HP P6000 Command View 10.0 includes HP P6000 Command View 10.0 for server-based management and array-based management, HP Performance Data Collector 10.0, HP Performance Advisor 10.0, HP P SMI-S EVA 10.0, and SSSU 10.0.
NOTE: HP Performance Data Collector was previously called HP Command View EVAPerf.
Controller software
2
XCS 6.1xx
XCS 6.200, 6.220
XCS 6.240, 6.250
XCS 09000000/09001000
XCS 09003000
XCS 09004000
XCS 09006000
XCS 09501x00
XCS 0952x000
XCS 0953x000
XCS 10000000, 10001000
SAN applications
HP Application Recovery Manager 6.1
HP Configuration Collector 1.2.4
6
HP Command View for Tape Libraries 1.8b
6
HP Command View for Tape Libraries 2.2
6
HP Command View for Tape Libraries 2.3.2
HP Command View for Tape Libraries 2.5
HP Command View for Tape Libraries 2.6x
HP Command View for Tape Libraries 2.7
HP Command View for Tape Libraries 2.8
HP P9000 Performance Advisor 5.2
HP P9000 Performance Advisor 5.3
8
HP Command View XP AE 5.8
1
Communication between layered applications and HP Command View EVA 9.2 is not supported when HP Command View EVA 9.2 is running on a VMware virtual machine.
2
Where an HP P6000 Command View version (or HP P6000 Replication Solutions Manager) is not supported with a particular XCS version, the HP P6000 Command View version (or HP P6000 Replication Solutions Manager) is supported for the
purposes of upgrading to the latest XCS version. For example, you are currently running XCS 09001000 and want to upgrade to XCS 09522000. Although XCS 09001000 is not supported with HP Command View EVA 9.1, you can upgrade to version
9.1 while the array is running XCS 09001000 and then upgrade to XCS 0952x000.
3
When HP P6000 Command View is running on a VMware virtual machine, communication between layered applications and HP P6000 Command View or later is supported if VMDirectPath is enabled.
4
VCS 3.110 and 4.110 are inactive versions but remain the latest and only recommended versions for use with EVA3000/5000 arrays.
5
HP recommends that you upgrade to XCS 6.2xx if you are using HP Command View EVA 8.0.1 or later.
6
HP P6000 Command View and HP Command View for Tape Libraries may coexist on the same server. However, a single instance of SMI-S CIMOM is available for both the P6000 and Tape providers. See the HP P6000 Command View Release
Notes for installation sequencing of HP P6000 Command View, HP Command View for Tape Libraries, and HP P6000 Replication Solutions Manager.
7
Supported on SAN hosts and server-based management only, not on array-based management.
8
HP P6000 Command View and HP Command View XP and/or HP Command View XP AE may coexist on the same server.
HP P6000 Command View
1
1
3
9.2
9.2.1
9.3
5
5
5
6
6
6
6
6
6
5
3
3
9.4
10.0
5
5
6
6

Advertisement

Table of Contents
loading

Table of Contents