Table of Contents
Advertisement
116 inch
1/6 inch
The default line spacing illustrated in Figure 7-1 is the only one
you need for almost all printing of text, but in some cases you may
want to increase or decrease the space between lines. The LX-80 has
several commands to do this. ESCape "0" decreases the line spacing
to 9-dot (9/72-inch), ESCape "1" decreases it to 7-dot, and ESCape
"2" returns it to 12-dot.
In addition, there are commands to specify the line spacing in
72nds of an inch and 216ths of an inch. If you need to make such fine
adjustments in the line spacing, see Appendix B for the proper com-
mands. In the chapter on dot graphics you will see how useful
ESCape "1" can be.
58
Figure 7-l. Standard line spacing
3 blank
rows
3 blank
rows
Advertisement
Table of Contents
