Table of Contents
Advertisement
To install the ribbon, first open the lid at the front of the LX-80 so
that you can see the print head assembly shown in Figure 1-4. Move
the assembly by hand to the center of the printer so that the other
parts of the printer will not get in your way. Also be sure that the
paper bail is against the black roller so it too will not be in your way.
Note: Moving the print head by hand when the printer is turned on
can harm the printer. Always be sure that the printer is turned
off before you move the print head.
Figure
Print bead assembly
l-4.
Advertisement
Table of Contents
