HP StorageWorks D2D Configuration Manual page 32
Hp storageworks linux and unix configuration guide for d2d backup systems (ej001-90978, july 2010)
Hide thumbs
Also See for StorageWorks D2D:
- User manual (210 pages) ,
- Installation and configuration manual (59 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
7.
To optionally configure uni-directional CHAP authentication you should update the iSCSI
Authentication details in the Web Management Interface, as shown below.
NOTE:
In the following commands, items in parentheses are user-defined strings. Substitute the
appropriate information for <iqn...>, <chap_password> and <chap_username>.
Once the HP StorageWorks D2D Backup System has been modified, the operating system should
be modified as follows:
# iscsiutil –t authmethod CHAP None
# iscsiutil –u –H CHAP_UNI
# iscsiutil –u –N <chap_username> –T <iqn...> –I x.x.x.x
# iscsiutil –u –W <chap_password> –T <iqn...> –I x.x.x.x
8.
If CHAP authentication has been enabled, rediscover operational target devices by typing the
following:
# ioscan -H 255
The output will be similar to this:
H/W Path
Class
==================================================
255/0
255/0/0.0
255/0/0.0.0
255/0/0.0.0.0
255/0/2.0
255/0/2.0.0
255/0/2.0.0.0
32
HP-UX 11i V2/V3 (PA-RISC & IA64)
Description
iscsi
ext_bus
target
tape
ext_bus
target
autoch
iSCSI Virtual Node
iSCSI-SCSI Protocol Interface
HP
Ultrium 3-SCSI
iSCSI-SCSI Protocol Interface
HP
MSL G3 Series
Advertisement
Table of Contents
