HP StorageWorks D2D Configuration Manual page 31

6. To display operational target devices, type:
# iscsiutil –pO
The output will be similar to this:
Operational Target Information
------------------------------
Target # 1
-----------
Target Name
03.com.hp:storage.d2d.cr209107ff.500110a6656e596f.library1
.drive1
Target Alias
No. of Target Addresses
Target Address # 1
-------------------
IP Address
iSCSI TCP Port
iSCSI Portal Group Tag
User Configured:
----------------
Authenticaton Method
CHAP Method
Initiator CHAP Name
CHAP Secret
Header Digest
Data Digest
Target # 2
-----------
Target Name
03.com.hp:storage.d2d.cr209107ff.500110ad6bd1034b.library
1 .robotics
Target Alias
No. of Target Addresses : 1
Target Address # 1
-------------------
IP Address
iSCSI TCP Port
iSCSI Portal Group Tag
User Configured:
----------------
Authenticaton Method
CHAP Method
Initiator CHAP Name
CHAP Secret
Header Digest
Data Digest
: iqn.1986-
:
: 1
: x.x.x.x
: 3260
: 1
:
: CHAP_UNI
:
:
: None,CRC32C (default)
: None,CRC32C (default)
: iqn.1986-
:
: x.x.x.x
: 3260
: 1
:
: CHAP_UNI
:
:
: None,CRC32C (default)
: None,CRC32C (default)
D2D Backup System 31