Using The Epson Remote! Utility (Lx-300+ Only); Installing Epson Remote; Accessing Epson Remote - Epson LX-1170 User Manual

Using the EPSON Remote! Utility
(LX-300+ only)
The EPSON Remote! utility allows you to easily change the
printer's default settings from your computer's DOS prompt.

Installing EPSON Remote!

Follow these steps to install the EPSON Remote! utility:
1. Insert the printer software CD-ROM into the CD-ROM drive.
2. At the DOS prompt, type D:\SETUP. (If you inserted the disk
into a drive other than drive "D," substitute "D" with the
appropriate letter.) Then press Enter.
3. Select your printer's name in the Printer Model window and
then press Enter. C:\EPUTIL appears as the default directory.
4. Press Enter again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.

Accessing EPSON Remote!

To access the EPSON Remote! utility, type C:\PRNSET at the DOS
prompt and press Enter. Then follow the on-screen instructions
to use this utility. You can also access the EPSON Remote! utility
by typing C:\PANEL at the DOS prompt and then pressing Enter.
The PRNSET and PANEL access methods differ slightly. The
PANEL method opens a condensed version of EPSON Remote!
that only provides the most often used settings.
3-16
Using the Printer Software