For Dos Programs - Epson LX-1170 User Manual

For DOS programs

To control the printer from DOS application programs, you need
to select the printer you are using or another available printer
from the printer list of your application.
Choose the EPSON LX-300+/LX-1170 printer at the appropriate
step in the setup or installation procedure of your DOS
application program. If the list in your application does not
include the LX-300+/LX-1170 printer, choose the first available
printer from this list.
For LX-300+.
LX-300
LX-810/850
LX-80/86
FX-850
FX-86e/800
If you plan to use color, you must choose either LX-300+, LX-300,
JX-80, or EX-800. The other printers cannot use color.
For LX-1170
FX-1180
FX-1170
FX-1050
FX-1000
FX-105
Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.
JX-80
EX-800
Any FX printer
EPSON printer
Draft printer
FX-100+
FX-100
Any FX printer
EPSON printer
Draft printer
Setting Up the Printer
1
1-23