Gigabyte GA-EP45-UD3P User Manual page 95

When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[ fg TAB]-Switch Window
To check more detailed information about the array, use the <Tab> key while in the Main Menu block to move
the selection bar to the RAID Disk Drive List block. Select the array and press <Enter>. A small window dis-
playing the array information will appear in the center of the screen (Figure 9).
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[ fg TAB]-Switch Window
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level Capacity
0-Stripe 240 GB
[ hi ]-Select ITEM
Figure 8
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
[ RAID Information ]
Name: GRAID
Level: 0-Stripe
Block: 128 KB
RAID Level Capacity
Capacity: 240 GB
0-Stripe 240 GB
Members: HDD 01
Status: Normal
[ hi ]-Select RAID
Figure 9
- 95 -
Capacity
120 GB
120 GB
Status Members(HDDx)
Normal 01
[ENTER]-Action
Capacity
120 GB
120 GB
Status Members(HDDx)
Normal 01
[ENTER]-Detail
Type/Status
RAID Inside
RAID Inside
[ESC]-Exit
Type/Status
RAID Inside
RAID Inside
[ESC]-Exit
Appendix