Adjusting The Speaker Volume Level; Using The Menu Mode - Uniden DSS 2475 Quick Start Manual

UP308BH (DSS2465) ENG OM 12/28/04
Press and hold
/ or
L M
on the base to scroll
quickly through the
volume levels.
[ 44 ]
8:26 AM Page 44

Adjusting the speaker volume level

When the base speaker is in use, press
volume. Press / for louder or
L
The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.

Using the menu mode

The Menu mode allows you to set the following Answering System functions.
• To scroll through the menu options, repeatedly press
on the base in the standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.
• If you press , the operation is canceled.
• If the system remains idle for about 5 seconds after
the announcement, the system returns to standby.
Once /SELECT or /SELECT is pressed, the
idle time is extended to 10 seconds.
• If there is an incoming call, the operation is canceled.
• When you have completed the setting, press
exit the menu mode, or
next menu option.
• You can also set these menus from the handset. See
"Answering System Setup" on page 19 for instructions.
For your convenience, voice prompts will guide you
through the menu setup mode.
/
or on the base to adjust the
L M
/ for softer.
M
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
to
to move to the
CLOCK/MENU