Tips For Maintaining The Correct Printing Position - Epson LQ 300 User Manual

When you switch back to the paper feeder, move the
paper-thickness lever back to its normai position. To do this,
first press the PAUSE button to turn the PAUSE light on. Next
hold down the REPLACE INK (ALT) button until the carriage
moves to the middle position. Then turn the paper-thickness
lever all the way to the left (counterclockwise).

Tips for Maintaining the Correct Printing Position

There is an area at the top and bottom edges of each sheet that
the printer uses to load and feed the paper. You cannot print on
these portions of the page.
If the margins and page breaks in your document do not take
into account these unprintable areas, you may find that the
printing position is too low on the page or that part of one page
is printed at the top of the next page. Your software may be set
to print on continuous paper or to print too many lines on a
page. To correct this problem, try the following:
Cl Reduce the top and bottom margins in your document,
through your software application.
2-6
Using Other Printer Functions