Advertisement
Quick Links
Package Contents:
• B 122-000 HDMI Active Extender
• External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 0.5A)
• Owner's Manual
Installation
Note: Test to make sure the entire installation works properly before pulling cables through ceilings/walls.
BLU-RAY PLAYER
1080p (24Hz)
Connect the longer HDMI cable between the source and the connector on the B122-000 labeled "Source."
1
Note: For extension distances Over 75 ft., use 24Awg HDMI cable such as the Tripp Lite P568-100-HD.
2
Connect the external power supply to the B122-000, and then plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply (UPS),
or Power Distribution Unit (PDU). The Green LED will illuminate to indicate that the unit is receiving power.
Note: External power is not required in all installations. Power can be pulled through the HDMI cable from the video source and display. However, if the source
and display do not provide this power, the included power supply must be used.
3
Connect the shorter HDMI cable between the monitor and the connector on the B122-000 labeled "Display."
Note: The HDMI cable connecting the monitor to the B122-000 must be no longer than 16 ft. (5 m.).
201203197 93-3143.indd 1
Owner's Manual
HDMI Active Extender
Model:
B122-000
1111 W. 35th Street, Chicago, IL 60609 USA
Product Features:
• Extend either a 1080p (24Hz) or 1080i (60Hz) signal up to 150 ft. from
the source.
• HDCP-compliant
• External power not required in most installations
B122-000
www.tripplite.com/support
MONITOR
3/26/2012 4:01:30 PM
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tripp Lite HDMI B122-000
Summary of Contents for Tripp Lite HDMI B122-000
-
Page 1: Package Contents
B122-000 1080p (24Hz) Connect the longer HDMI cable between the source and the connector on the B122-000 labeled “Source.” Note: For extension distances Over 75 ft., use 24Awg HDMI cable such as the Tripp Lite P568-100-HD. Connect the external power supply to the B122-000, and then plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply (UPS), or Power Distribution Unit (PDU). The Green LED will illuminate to indicate that the unit is receiving power. Note: External power is not required in all installations. Power can be pulled through the HDMI cable from the video source and display. However, if the source and display do not provide this power, the included power supply must be used. - Page 2 EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste WARNING Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice. 1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support...
Need help?
Do you have a question about the HDMI B122-000 and is the answer not in the manual?
Questions and answers