Audio Menu Options - ProScan 40LC45Q User Manual

Setupmenuoperation- Audio menuoptions
Press MENU on the side panel or on the remote control and then use A / v to select the AUDIO menu, press ENTER
button to enter it (see the picture below).
1. Use A / v to select what you want to adjust in the AUDIO menu.
2. Press ENTER or _ button to adjust (according to the guiding sign in the bottom right corner of the menu).
3. When you are satisfied with your adjustment. Press MENU to exit.
Balance
Press A / v button to select it and then use ,t / _ to adjust the audio output between left and right speakers.
Bass
Press A / v button to select it and then use _ / =, to increase or decrease the level of the lower-pitched sounds.
Treble
Press A / v button to select it and then use _ / =, to increase or decrease the level of the higher-pitched sounds.
Sound Mode
You can use the presetting sound (User / Voice / Concert / Jazz)
You may select the sound mode directly by pressing the SOUND button on the remote control.
Sound Surround
Press A / v button to select it and then use to select the sound surround on or off.
Digital Audio Output (Coaxial Out )
Press A / v button to select it and then use to select the one of mode of the digital audio output such as PCM and RAW or
off.
]P