Class B digital device This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 3
CAUTION: To reduce lhe risk of electric shock, do not remove cover or back. No user- serviceable parts inside. Refer ServTcing to qualified service personnel. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC rules could avoid the users' authority to operate this equipment.
READ THESE INSTRUCTIONS. PROTECT THE POWER CORD FROM BEING WALKED KEEP THESE INSTRUCTIONS. ON OR PINCHED PARTICULARLY AT PLUGS, HEED ALL WARNINGS. CONVENIENCE RECEPTACLES, AND THE POINT FOLLOW ALL INSTRUCTIONS. WHERE THEY EXIT FROM THE APPARATUS. DO NOT USE THIS APPARATUS NEAR WATER.
Use this cloth to wipe the surface of of the surface may be adversely affected. Welcome to the bright and vivid world of Proscan TV set. We hope that you will have many years enjoyment from your new select.
Tableof contents FCC NOTICE ................... WARNING AND CAUTION ................IMPORTANT SAFETY INSTRUCTIONS ............CLEANING MAINTENANCE ..............DEAR PROSCAN CUSTOMER ..............SAFETY PRECAUTIONS ................INSTALLATION TV STAND ................Preparation using your new TV ............. FRONT PANEL ..................REAR PANEL .................... CONNECTIONS AND EXTERNAL INPUT SETTINGS ..........
SafetyPrecautions ,_WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS. Set up Do not place the TV set on sloped or unstable surfaces. Do not place any objects on top of the TV set.
Page 8
SafetyPrecautions When using the TV set Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body parts are brought too close.
TV STANDINSTALLATION Place the TV faced down on a soft cloth or cushion to protect the LCD panel from damage. Put the stand body into the stand base. Insert into 4 black screws (signed in picture below) tighten. Note: The 4 screws are completely the same.
Preparation for usingyour newTV- FrontPanel Familiarizing Yourself with the Main Hardware (The picture of the product may vary depending on the model) A. Select signal input. (It changes to "ENTER" function when main menu displays ) B. Main Menu display and menu selection C.Channel D.
Preparation for usingyour newTV- RearPanel Rear panel (The picture of the product may vary depending on the model) HDMI Input S-Video Input Video Input1 :J Audio D, D1 Input2 :K Component Input 1 VGA Input Video Video: El, F1, G1 Audio Audio: B, B1...
Preparation for usingyour newTV - Connections Checking Items before Connecting Please check the list below before connecting the product to other devices. < Check items before connecting > Check the instruction manual when connecting external devices. External products sometimes have different buttons and locations.
Usingthe remotecontrol- Learningaboutremotecontrol POWER: Power on/off. POWER SLEEP: Press to select a preset time interval to automatically shut the TV. ASPECT: Press to adjust the screen size. DISPLAY: Press to Check your current mode..@® ®® ......MTS: Press to select your favorite language in digital broadcasting.
Usingthe remotecontrol- Remotecontrolinstructions Inserting the batteries into the remote control Open the cover of battery cabin on the back of the remote control. Insert two AAA 1.5V batteries, ensuring the correct polarity (+/-). Close the cover. • If the remote control is not working, see the checkpoints below.
Basicoperation- ChoosingTV Channel TURN ON LCD TV Connect the AC input cable to power the LCD TV. At this time the TV will enter standby mode and indicator show red. User POWER button or button on the remote control. TURN OFF LCD TV Press POWER button or _ button on the remote control to enter standby mode.
Basicoperation- Selectinginputsource You can select the input source by pressing the INPUT on the remote control or on the side panel. INPUT Menu Press VOL+/- to adjust the volume. If you want to switch the sound OFF, press the MUTE. You can cancel the mute function by pressing MUTE or VOL+/-.
Setupmenuoperation-Adjust the OSDscreen Press the MENU button to display the main menu. Use _ / b. / A / v buttons to select and adjust the available menus. NOTE: The OSD (On Screen Display) function enables you to adjust the screen status conveniently until it provides graphical presentation.
Setupmenuoperation- ScreenLanguage& PictureMenuOptions NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying menus and indications. Press MENU to display the main menu. Press A / v repeatedly to select the SETUP MENU. Use ,L / v and ENTER to select MENU LANGUAGE.
Setupmenuoperation- Audio menuoptions Contrast Press ENTER button to select it and then use ,4 / _, to adjust the contrast of picture. Brightness Press ENTER button to select it and then use ,4 / _, to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use ,4 / _, to adjust the sharpness level of picture.
Setupmenuoperation- Setupmenuoptions Audio Language Press ENTER to one of the audio language such as English/French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to select it and then <. / i_ to increase or decrease level...
Page 21
Setupmenuoperation- Setupmenuoptions Auto Ch Search Press ,L / v to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu will display.
Setupmenuoperation- Featuremenuoptions Menu Language To select language of the OSD such as English/French and Spain. Reset Press ENTER to return to the factory setting. Press MENU on the side panel or on the remote control and then use A / v to select the FEATURE menu. Use A / v to select what you want to adjust in the FEATURE menu.
Page 23
Setupmenuoperation- Featuremenuoptions Sleep Timer Press ENTER button to select it and then use < / _ to select the amount of time before your TV turn off automatically and press the ENTER that can select the 15'/30'/45'/60'/90'/120'/180'/240' and OFF. Advanced Video Menu Press ENTER to enter the advanced video menu as below.
Page 24
Setupmenuoperation- Featuremenuoptions Note: Advanced Rating is only available in digital channel. US Ratings Press ENTER to enter the US Ratings as below. MPAA Press ENTER to lock or unlock one of NONE/G/PG/PG-13/R/NC-17 and X. • NONE: No restrictions. • G: General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.
Page 25
Setupmenuoperation- Featuremenuoptions • TV-Y7: Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. • TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two six.
Page 26
Setupmenuoperation- Featuremenuoptions Advanced Parental Lock When select the ON for Advanced Rating, the Advanced Parental Lock will display. NTSC CC To adjust NTSC closed caption. ATSC CC To adjust ATSC closed caption. Digital Closed Caption This menu allows you to set the closed caption, and press ENTER to enter Closed Caption Option menu as below. •...
Setupmenuoperation- VGAmenuoptions Continuously Press [INPUT] on the remote control until coming VGA on the top-right screen. Use A / T to select what you want to adjust in the FEATURE menu. Press ENTER button to select it and then use ,t. / _ to adjust. When you are satisfied with your adjustment, press MENU to exit the main menu.
Setupmenuoperation-YPBPR menuoptions screen size also will change. Position- This function is to adjust the picture to Left/Right and Up/Down as you prefer. Auto Adjust Press ENTER button to select it and then use ,4. / D, to do an auto adjust that will automatically adjust the available options for the best viewing configuration.
Setupmenuoperation- HDMImenuoptions Continuously Press [INPUT] on the remote control until coming "HDMI" on the top-right screen. 1. Use A / v to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select and then use ,4. / =, to adjust. 3.
Appendix-Tr0ublesh00ting Identifying Problems If there are any problems using the product, please first consult the list below. If the list below does not solve the problem, call our Customer Service Center immediately. Setup and Connection The TV won't turn on. Check your power cable connection. •...
Page 31
Appendix-Tr0ublesh00ting • Disfunctioning channels. Check if the channel has been selected correctly. Try changing the position of the antenna. • Picture with white and black dots. Check if your antenna is damaged or any connections are broken. Replace your antenna. •...
Page 32
Appendix-Tr0ublesh00ting Monitor • The PC Screen continually appears and disappears. Check the connection between the TV and the computer and see if the connector is locked. • A "There is no signal "message appears. This happens if the signal from the video card is exceeded for the maximum resolution or frequency...
Appendix-Removing T V Stand If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate for the size and weight of the LCD TV. CAUTION • Be sure to follow the instructions. Incorrect installation of the stand/wall...
Appendix-Wall MountingUnit Specification Unit Dimension(unit: Screw Diameter Screw Length(unit: 400x200 Remark: The specification of screw is just used on the back cabinet. NOTE: Wall mount bracket is not included with TV and mounting of wall mount bracket to wall may vary depending on brand and size of bracket, Customer should consult bracket mounting...
Appendix-TV Specification Model 26LB30Q 32LB30Q Diagonal display size 26 inches 31.5 inches Television system American TV standard ATSC/NTSC system Audio multiplex BTSC system VHF: 2~13 UHF: 14~69 CATV:1~125 Channel coverage Digital Terrestrial Broadcast (8VSB): 2~69 Digital cable (64/256 QAM): 1~135 PC mode 640x480/60Hz, 800x600/60Hz,...
Need help?
Do you have a question about the 26LB30Q and is the answer not in the manual?
Questions and answers