Table of Contents
Advertisement
Preparation for using your new TV
Connectingto a computer
You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB
interface and PC audio interface(AUDIO INPUT4). Connect the devices as shown below.
PC/N_!I
Tospeaker _
RGB line
VGA
HDMI2
HDMI1
AUDIO IN
ToVGA
Audio line
I
VGA
COAXIAL
L
£
COMPONENT
NOTE: PC mode support resolution: VGA, SVGA, XGA.
Connecting to an antenna
To enjoy the televison program transmitted by your local TV station, you need an indoor or outdoor antenna
(not supplied). Perfect picture quality requires a good signal so the outdoor antenna is necessary. If you are a
subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments as the
following.
ANTENNASOCKET
ANT 750
Plug (not supplied)
Adaptor (not supplied',
COAXIAL CABLE (75D)
The signal comes from:
An outdoor antenna
TWIN-LEAD
FEEDER
An indoor antenna
(3000)
CATV net
2. Insert
the feeder
in
3. Tighten
the screw
-7-
Advertisement
Table of Contents
