Switching To Printing On Continuous Paper - Epson FX-1180 User Manual

4. Set the paper release lever to the single-sheet position.
5. Load single sheets as described in Chapter 4.

Switching to printing on continuous paper

To switch from printing on single sheets to printing on
continuous paper with a push tractor, follow the steps below.
Note:
To switch from printing with the optional front sheet guide to printing
with the front push tractor, you need to remove the front sheet guide.
1. If a single sheet remains in the printer, press the Load/Eject
button to eject it.
c
2. Make sure that the tractor is installed in the front or rear push
position and that continuous paper is loaded on it as
described earlier in this chapter.
3. Set the paper release lever to the front or rear push position,
depending on the tractor position you are using.
3-34
Printing on Continuous Paper
Caution:
Never use the knob to eject paper; this may damage the
printer or cause it to lose the top-of-form position.