Printer Specifications; Mechanical - Epson FX-1180 User Manual

Printer Specifications

Mechanical

Printing method:
Printing speed:
Printing direction:
Line spacing:
Printable columns:
Resolution:
Interfaces:
Paper feed methods:
C-2
Specifications
9-pin impact dot matrix
High speed draft
Draft
Near letter quality
Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
1/6-inch or programmable in 1/216-inch
increments
FX-880:
80 columns (at 10 cpi)
FX-1180:
136 columns (at 10 cpi)
Maximum 240 144 dpi (near letter quality)
One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode
support and one optional interface slot
Friction (front, rear)
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is
required) (front, rear)
Cut-sheet feeder (optional)
Roll paper holder (optional)
410 cps at 10 cpi
(455 cps at 12 cpi
maximum)
310 cps at 10 cpi
77 cps at 10 cpi