Important Safety Instructions - Epson FX-2170 User Manual

Important Safety Instructions

Before using your printer, read the following safety instructions to make
sure you use the printer safely and effectively.
Turn off and unplug the printer before cleaning. Clean with a damp
cloth only. Do not spill liquid on the printer.
Do not place the printer on an unstable surface or near a radiator or
heat register.
Do not block or cover the openings in the printer's cabinet. Do not
insert objects through the slots.
Use only the type of power source indicated on the printer's label.
Connect all equipment to properly grounded power outlets. Avoid
using outlets on the same circuit as photocopiers or air control
systems that regularly switch on and off.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure the total
ampere rating of the devices plugged into the extension cord does
not exceed the cords ampere rating. Also, make sure the total of all
devices plugged into the wall outlet does not exceed 15 amperes.
Except as specifically explained in this guide, do not attempt to
service the printer yourself.
Unplug the printer and refer servicing to qualified service personnel
under the following conditions:
If the power cord or plug is damaged; if liquid has entered the printer; if
the printer has been dropped or the cabinet damaged; if the printer
does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the
operating instructions.
vii