Installing The Printer Software; For Windows Xp, Me, Or 2000 - Epson FX-2190 User Manual

3. Plug the power
cord into the AC
inlet on the back
of the printer and
plug the other end
into a properly
grounded
electrical outlet.

Installing the Printer Software

After you connect the printer to your computer, you need to install the
EPSON printer software on the CD-ROM shipped with your printer. The
printer driver is the software that runs, or "drives," your printer. With it,
you can select printer settings such as print quality, resolution, and paper
size.
The software includes EPSON Status Monitor 3 (Windows
98, 95, or NT 4.0), which displays printer status information and notifies
you of printer errors. See the Reference Guide for more information.
Note:
❏
Installing the printer software for Windows NT, XP, or 2000 may require
administrator privileges. If you have problems, ask your administrator for
more information.
❏
If the New Hardware Found screen or any other wizard appears when you
turn on your computer, click Cancel .
❏
If the Digital Signature Not Found screen appears, click Yes . If you click
, you must reinstall the printer driver.
No
The printer software CD-ROM also includes the EPSON Remote
Configuration Manager, which lets you change the printer's default
settings. See "Installing the Remote Configuration Manager" on page 15.

For Windows XP, Me, or 2000

1. Make sure Windows is running and the printer is turned off.
12
Setting Up the Printer
®
XP, 2000, Me,