Epson FX-2190 User Manual page 16

2. Click Yes . After a
moment, you see the
Welcome screen:
3. Click Next and follow the instructions on the screen. When the
installation is complete, click Finish . (If you see the folder window
open on the screen, close it so you can see the final installation
screen.)
The Remote Configuration Manager is installed on the computer in its
own program group, along with an uninstall option and the online
User's Guide. See the User's Guide for instructions on using the program.
To start the program, select Programs , Epson Remote Configuration
Mgr , and then click Epson Remote Configuration Manager .
To open the manual, select Programs , Epson Remote Configuration Mgr ,
and then click Epson Remote Configuration Manager User's Guide .
Note:
If you are using Windows 2000 and the printer is connected to the parallel port,
Remote Configuration Manager may not work. In this case, do one of the
following:
❏
Before running the program, set the printer driver to the LPT2 port. Then
use Remote Configuration Manager to check or change the default settings
as desired. After you finish using the program, remember to return the
setting to LPT1.
❏
Connect the printer to the USB port instead.
16
Setting Up the Printer