Table of Contents
Advertisement
& AC Back Function
Determines the state of the system after the return of power from an AC power loss.
The system stays off upon the return of the AC power. (Default)
Soft-Off
The system is turned on upon the return of the AC power.
Full-On
The system returns to its last known awake state upon the return of the AC power.
Memory
& Power-On by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Date (of Month) Alarm: Turn on the system at a specifictime on each day or on a specificday in a month.
Resume Time (hh: mm: ss): Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& ErP Support
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
2-8
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Hardware Thermal Control
Reset Case Open Status
Case Opened
Vcore
DDR15V
+12V
VCC3
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
System Smart FAN Control
: Move
Enter: Select
F5: Previous Values
& Hardware Thermal Control
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Opened field will
Enabled
show "No" at next boot.
& Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
PC Health Status
[Enabled]
[Disabled]
No
1.392V
1.488V
12.168V
3.400V
37
C
o
37
C
o
1264 RPM
0 RPM
[Enabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 32 -
Item Help
Menu Level `
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
