Diagnostics - Golden Technologies Alante GP201 Owner's Manual

Alante´ GP201 Manual
DIAGNOSTICS/TROUBLESHOOTING
The joystick controller LED display is designed to help you diagnose any
problems with the electrical components of your power chair. The LED
display does this by flashing on and off in a coded sequence. Below is a
list of trouble-shooting actions. Try to use this list before you contact
your Golden Technologies representative. Go to the number in the list
which matches the number of flashing bars and follow the instructions.
If the problem persists after you made the checks described, contact your
Golden Technologies representative for further assistance.
Flash Codes indicate the nature of an abnormal condition directly from
the A-Series Information Gauge. Without the use of any servicing tools,
the condition can be simply diagnosed.
Flash Description
Code
1 User Fault
2 Battery Fault
3 Left Motor Fault
4 Right Motor Fault
5 Left park brake fault
6 Right park brake fault
7 User Interface Fault
8 Joystick controller Fault
9 A-Series Bus
Communications Fault

DIAGNOSTICS

Controllers are not user serviceable. Specialized tools are necessary
for the repair of any A-Series component.
A flashing A-Series Information Gauge indicates there is an
abnormal condition
components that A-Series provides fault information for include the
motors, the park brakes, the batteries, the cabling and the A-Series
modules themselves.
Possible stall timeout or user error.
Release the joystick controller to
neutral and try again.
Check the batteries and cabling. Try
charging the batteries. Battery may
require replacement.
Check the left motor, connections and
cabling.
Check the right motor, connections
and cabling.
Check the left park brake,
connections and cabling.
Check the right park brake,
connections and cabling.
Display PCB fault. Consult service
agent.
Consult service agent.
Consult service agent.
somewhere on
31
the power chair.
Revised 060208
The