Integrated Peripherals - Gigabyte GA-M68MT-D3P User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
NV Serial-ATA Controller
 Serial-ATA RAID Config
Onboard Audio Function
On-Chip MAC Lan
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
USB Controllers
USB Legacy Function
USB Storage Function
: Move Enter: Select
F5: Previous Values
NV Serial-ATA Controller
Enables or disables the integrated SATA controller(s). You can select whether to enable all SATA control-
lers or only the first SATA controller. (Default: All Enabled)
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
NV SATA RAID function
x NV SATA 1 Primary RAID
x NV SATA 1 Secondary RAID
x NV SATA 2 Primary RAID
x NV SATA 2 Secondary RAID
: Move Enter: Select
F5: Previous Values
NV SATA RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to configure
RAID for individual SATA channel. (Default: Disabled)
NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is
configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 1 Secondary RAID
Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller. This item
is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Primary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller. This item
is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Secondary RAID
Enables or disables RAID for the second channel of the second integrated SATA 3Gb/s controller. This
item is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
Integrated Peripherals
[All Enabled]
[Press Enter]
[Auto]
[Auto]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
[Enabled]
[Enabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Serial-ATA RAID Config
[Disabled]
Enabled
Enabled
Enabled
Enabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 27 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup