Sony WEGA KLV-21SG2 Operating Instructions Manual page 53

Notes on "Memory Stick Duo"
, To use a "Memory Stick Duo" with this unit,
attach it to the
Memory
Stick Duo
adapter
before
inserting it into the unit.
° Make sure that you attach tire "Memory Stick
Duo" to tire adapter correctly.
° Make sure that you insert the Memo W Stick Duo
adapter correctly, otherwise tire unit may be
damaged.
° Do not insert tire Memory Stick Duo adapter
without a "Memory Stick Duo" attached. Doing so
may result in malfunction of tire unit.
On handling the "Memory Stick"
Labe a ea .............................. ii !
* You cannot record or erase images when the write-
protect switch on the "Memory Stick" is set to
LOCK.
° Image data may be damaged in the following
cases:
- If you remove tire "Memory Stick," or turn tire
power off while tire access lamp is lit or
flashing.
- If you use the "Memo U Stick" near magnets or
magnetic fields, such as speakers.
- If you unplug the AC power cord while tire
access lamp is lit or flashing.
o Avoid touching the terminal of "Memory Stick"
media or coming in contact with a metal object.
° Do not drop, bend, or submit "Memo W Stick"
media to external shock.
° Do not disassemble or modi{y "Memou Stick"
media.
° Avoid getting liquid on °'Memory Stick" media.
° Apply labels only within the designated label area.
° To avoid permanent damage to digital photo or
movie, do not use or store "Memory Stick" media
in a location subject to:
- High temperature (such as near a heater or
inside a hot car)
- High humidity
- Direct sunlight
- Corrosive substances
- Magnetic fields
- Excessive dust
- Static electricity or electric noise
- Electric surges
Me _o_y 8tc,i
° Store and carry "Memory Stick" media in its
original case to ensure protection of stored data.
* Save a backup or stored data.
On formatting the "Memory Stick"
The "Memory Stick" is shipped with an exclusive
standard format. A "Memory Stick" formatted by a
computer does not have a guaranteed compatibility
with this TV.
When the access lamp is lit or flashing
When the access lamp is lit or flashing, the "Memory
Stick" is reading or writing data. l[n this case, do not
shake or strike the TV, turn the power off, or eject
the "Memory Stick," otherwise the image data may
be damaged.
53