Sony WEGA KLV-21SG2 Operating Instructions Manual page 15

Disconnect al! power sources betbre makh_g any connections.
Using an AUDI[O cable, connect the TV's AUDIO ()UT jacks to the audio
" S -ecelver : AUDI[O IN jacks.
Rear of TV
Y
P_
L
AUDIO
AUDIO-R (red)
Audio
input
AUDIO came
(not supplied)
Audio receiver (Compact
AV system DAV-FC9, etc,)
When using your audio system speakers
Set "Speaker" in the _(_ (Audio) menu to "Off." The TV's sound is not
output from tl_e AUDI[O OUT jacks when "Speaker" is set to -On.,,
You can still control the w_lume output from your audio systm_ using the
TV's remote control (see "Programming the remote control" on page 30), by
setting "Audio Out" in the @ (Audio) menu to "Variable."
If you want to adjust the volume through your audio system, set "Audio Out"
to "Fixed."
Notes
• The video signal is not output through the AUD10 OUT jacks.
• When "Audio Out" M the _(_ (Audio) me_m is set to _Variable," "Speaker" is to "Oft,"
check if the speaker volume is moderate be*bre switclfing "Speaker" fl'om "Oft" to "On."
Othepa.ise, fl_espeaker volume may be too loud.
15