Programming The Remote Control - Sony Fd Trinitron WEGA KV-27FS120 Operating Instructions Manual

Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR
combination unit) that you want to control with the TV's remote control, use the following
procedure to program the remote control.
1 Check the list of "Manufacturer's Codes" on page 6 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
CODF SFT
2
Press CZD.
_ VCR/DVD SAT/CA_I_ , CODE SET
The Q and CZ) FUNCTION button w,II flash when you press CZD
VCR/DVD SAT/CABLE
3 Press CD or C_D FUNCTION button to indicate the type of component you want to
program with the remote control.
_ You must dO Ste 4 Within 10 Seconds Ofste 3 Or oU mustiedo ste s 2 and3
P P , Y P •
4
Use the (_)-_) buttons to enter the three-digit manufacturer's code number.
ENTER
5
Press
O"
6
To check if the code number works, aim the TV's remote control at the component and
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with
that component. If it responds, you are done. If not try using another code listed for that
manufacturer.
,_ If yOUhave piOblemS programming youi remote €0ntiol see ;'TroUbleshOoting'! 0n page 42.