Sony Handycam CCD-TR30 Operation Manual page 42

Sym.t
• _. The POWER lamp
does not light.
_' The CHARGE lamp
i flashes.
• [
_Coffective Actions ",
Set the selector to the center
position and disconnect the
power cord. After about one
minute, reconnect the power
cord and set the selector to
CHARGE again.
See the following chart.
When the CHARGE Lamp Flashes
Check through the following chart.
)age
Remove the battery pack from
the AC power adaptor.
.÷
If the CHARGE lamp flashes
again, install another battery.
I The CHARGE lamp lights up.
I The CHARGE lamp flashes.
Install the same
battery again.
J
If the CHARGE lamp lights up and goes
out after a while, the battery is
operating correctly."
If the CHARGE lamp goes out after a
while, the problem is with the battery
firstly installed.
The problem is with the AC power
adaptor.
Please contact your Sony dealer.
* If you use a battery pack which you have just bought or which has been left unused for a long
time, the CHARGE lamp may flash at the first charging. But this is not a problem. Repeat again to
charge with the same battery pack.
42