Editing Onto Another Tape - Sony Handycam CCD-TR30 Operation Manual

You can create your own video program by editing with any other [] 8 ram, I"1111 HiS, _ VHS,
S-VHS, _ VHSC, _ S-VHSC, 11] Betamax or _ ED Betamax VCR that has
audio/video inputs.
Connect the camcorder to the VCR using an A/V connecting cable (not supplied). (p. 19)
Set the input selector on the VCR to LINE, if available. Set the POWER switch to PLAYER.
: Signal flow
il • !
(1) Insert a blank tape (or a tape you want to record over) into the VCR. And insert your recorded
tape into the camcorder. (2) Play back the tape on the carncorder until you locate the point where you
want to start editing, then set the camcorder in the playback pause mode. (3) On the VCR, locate the
recording start point and set the VCR in the recording pause mode. (4) Press l| on the camcorder and
VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing Momentarily
Press II on the VCR.
To Stop Editing
Press [] on both the camcorder and the VCR.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the TV, erase the indicatorsby pressing
DISPLAY on the Remote Commander so that they will not be superimposed on the edited tape.
C
>_
"U
o
o
t_
O
c-
O
D
o
D
-.i
¢D
23