Disc Memo - Sony MHC-GS100 Operating Instructions Manual

Programing CD tracks (continued)
Other Operations
TO DO this
Cmlcel Program Press PLAY MODE repeatedly
play until "PGM" disappears.
Check tile Press _ or _ repe_ledly
program during Program Play.
Clear a track or Press CLEAR in stop mode.
disc from the
end
Clear the entire Press and hold CLEAR in slop
program mode.
Add tracks or Perform step 6.
discs to tile end
of program in
stop mode
Tips
• Tile program you mode remains atter Program Play
finishes. To play the same program _gain, press CD,
then press _ (or _91 _ on the remote) in
Program Play mode.
• " " appears when the Iotal CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 2! or over.
• The pmgramed disc and track numbers remain until
you erase them, SOthat the system plays only _lle
existing disc and track numbers if you replace discs.
However, the disc and track numbers that are nol
found in the system or on the disc are deleted f?om
the program, mid _lle resl of the program is played
ill the programed order.
-- Disc Memo
You can lobel up to 60 CDs wilh titles of up to
20 characters. Whenever you load a lzbeled
CD, 1he title appears in lhe display.
Notes
• You cannol label a CD-TEXT disc.
• To ensure that Disc Memos are not erased t?om
memory, have the system connected to a wall oullet
at least once a day.
• You can label a CD only during Normal Play (when
"1 DISC" or "ALL DISCS" is displayed) in stop
mode.
1 Press CD to switch the function to CD.
If "St fUF" or "PGM"appears, press PLAY
MODE repeatedly until both disappear.
2 Turn DISC SELECT (or press DISC - or
DISC + on the remote) until the disc
number you want to label appears.
3 Press MENU.
4
Press I<<1 or _ repeatedly until
"NAME IN" appears.
S Press ENTER.
The cursor appears.
6 Turn DISC SELECT until the character
you want appears.
You can input the following characters:
• Upper cases(A Z)
• Numbers (0 9)
• Symbols(' /,+<>_ ")
12us