Station Name - Sony MHC-GS100 Operating Instructions Manual

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
-- Preset Tuning
Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 14).
1 Press TUNER/BAND repeatedly to
select "FM" or "AM".
2 Press PRESET - or + repeatedly to tune
in the desired preset station.
Listening to non-preset radio
station
-- Manual Tuning
1 Press TUNER/BAND repeatedly to
select "FM" or "AM".
2 Press TUNING - or + repeatedly to tune
in the desired station.
TipS
• To improve broadcast reception, adjus_ the supplied
antennas, or connect a commercially available
external antenna.
• When an FM sterco program has s_atic noise, press
REPEA1YFM MODE repe_ledly until "MONO"
appears. There wilt he no stereo ef'_et, but the
reception wil! improve.
• By pressing and holding TUNING or ,the
f_equency indic_lion changes and scanning stops
when the system tunes in a smlion (Automatic
Tuning).
• To record from the radio, see "Recording to a tape"
on page 18.
-- Station Name
You can label each preset station with up lo
12 characters (Station Name).
1 Tune in the preset station you want to
label (see "Listening to the radio" on
this page).
2 Follow the same procedures as from
steps 3 to 9 of "Labeling a CD" on
page 12.
To cancel labeling
Press MENU.
To check the preset number and
frequency
The station name appears when you tune in the
labeled station.
To check the preset number and _Yequency,
press DISPLAY. The preset number and
fi'equency are displayed lbr 4 seconds and it
returns 1o the station name display.
To erase the name
1 Tune in the station.
2
Press MENU.
3 Press PRESET - or + repeatedly to select
"NAME IN", then press ENTER.
4 Press CLEAR repeatedly to erase the
name.
5 Press ENTER.
16us