Sony STR-DE485 Operating Instructions Manual page 32

Recording (continued)
Recording on a video tape
You con record from a VCR, a TV, a DVD
player or an LD player using Ihe receiver. You
can also add audio from a variety of audio
sources when editing a video tape. See the
operating instructions of your VCR or LD
player if you need help.
t
Select the program source to be
recorded.
2
Prepare the component for playing.
For example, insert the laser disc you w_mt
to record into the LD player.
3
Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4 Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
Tip
YOu can record the sound from any attdio soul_e onto
a video tape while copying from a video tape or laser
disc. Locate the point where you want to start
recording from another audio source, select the
program soul.e, then start playback. The audio from
dlat source will be ]_corded onto the audio track of
tile video tape instead of the audio from tile original
medium. To resume audio _ecording from the original
medium, select the video source again.
Notes
• Make sure to make both digital and analog
connections Io the VIDEO 2 and DVD/LD inputs.
Analog recording is not possible if you make only
digital connections.
• When MULTI CH IN is selected analog audio
signals of the current function is output from the
REC OUT jacks.
You can set the receiver to turn off
automatically zt a specified time.
Press SLEEP on the remote while the
power is on.
Each time you press the button, the display
changes cyclically as l_311ows:
2-00-00 -._ 1-30-00 _ 1-00-00 _ 0-30-00
OFF
The display dims after you have specified the
time.
Tips
• You can freely specit_ the time, After pl_ssing
SLEEP, s_ify the time you want using the MENU
/ _ or MENU +[- on tile l_ceiver. The sleep
time changes in 1 minute intelwals. You can specit}€
up to 5 hours.
• To check the l_maining time before the _ceiver
turns off, pl_ss SLEEP. The remaining time
appears in the display.
The SET UP button allows you to mnke the
lbllowing adiustments.
1
Press SET UP.
2 Press MENU <_ or MENU _> to select
the parameter you want to adjust.
3 Press MENU + or MENU -to select the
setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
32GB