Setting Up The Channel List - Initial Setup - Sony BRAVIA KDF-46E3000 Operating Instructions Manual

4. Setting Up the Channel List
- Initial Setup
The Initial Setup screen appears when you turn
on the TV for the frst time.
After you finish connecting the TV. you can run
Initial
Setup
to create a list of available analog
and digital channels if you have connected an
antenna or cable directly to the TV's VHF/UHF/
CABLE input.
You will be prompted to select the language of
your choice to be used for all the on screen
settings.
Use the remote control to navigate through the
Initial Setup:
€/_ button:
Allows you to highlight ___ptions
where applicable.
@ button:
Allows you to select the
highlighted option and advance
to the next screen.
_. button:
Allows you to mo_.e back to tile
previous screen.
. button:
Allows you to mo,,e to the next
screen.
• If you accidentally turn offthe TV during the Initial
Setup process, the Initial
Setup
will restart from the
beginning when the TV is turned back on.
• The Auto
Program
may be canceled while the
channels are being scanned. Press RETURN first, then
press either I./* on the remote control, highlight "Yes"
to cancel or "No" to resume the Auto
Program.
V1To Run Initial Setup Again or Auto
Program Again at a Later Time
Select the Initial Setup feature from the XMBTM
(XrossMediaBar) or refer to the Initial
Setup
described on page 42. To run Auto
Program,
see
page 37.
F1To Add Digital Channels
Use the Add Digital Channels
feature as described
on page 38. (Useflfl for antenna installations.)
MTo Display the Picture in Your Preferred
Aspect Ratio
Select the proper Wide Mode
as described on pages
23 and 35.
You may want to set up convenient features such
as Favorites (see page 21 ), Show/Hide
Channels (page 38), Edit Channel Labels
(page 38) when Auto Program is completed.
Follow the help text provided on the screen to run
Auto Program
with the connected signal source
or select Skip to skip the Auto
Program
if you
am receiving channels from a cable box or satellite
receiver and the VHF/UHF/CABLE input is not
connected. The Auto
Program
will scan for
available channels. When the Auto
Program
is
completed, the TV will display how many analog
and digital channels are found.
18