Tv Settings Descriptions; Product Support; C Ock/T Mers Sett Ngs; Picture Settings - Sony BRAVIA KDF-46E3000 Operating Instructions Manual

TV Settings Descriptions
Contact Sony Sony contact information is available from this screen for your convenience. Your TV's
specific int_rmation such as Model Name, Serial Number, Software Version and
downloadable ratings if available from the TV are displayed here.
Signal Diagnostics
Press @ to display the diagnostics information for the current signal.
Current Time
Timer
Sleep Timer
Sets the current time (day, hour, minutes, and AM/PM). The Timer feature will not be
available until you set the
Current Time.
1 Use the tl./!1,/I,/,_, button to highlight the Clock/Timers icon and press @.
2 Use the tl./I!,/I,/,_, button to set the current time.
3 Press RETURN to display the confirmation screen.
4 Select Yes or No to save changes you made. Selecting Yes will save your settings
and exit the
Current Time
setting screen.
After the
Current Time
is set, you can set the
Timer
to automatically turn the TV on
and off and tune to a specific channel at a scheduled time.
1 Use the tl./I!,/I,/,_ button to highlight the Timer icon and press @,
2 Press @ to select On to set the timer.
3
Use the t/!/_,!,i, button to set the f)llowing: Day of the Week, Time, Duration,
Channel, and Volume.
4
Press RETURN to display the confirmation screen.
5 Select Yes or No to save changes you made. Selecting Yes will save your settings
and will light up the TIMER LED.
6 Exit the Timer setting screen.
Sets the time in minutes (Off,
15min, 30min, 45min, 60min,
90min, or
120min)
that
you want the TV to remain on before shutting off automatically. This can also be set using
the SLEEP button on the remote control (see page 20).
Picture Mode Vivid For enhanced picture contrast and sharpness.
Standard
For standard picture settings. Recommended for home entertainment.
Cinema For viewing fihn-based content. Most suitable for viewing in a
theater-like environment.
• Picture Mode can also be accessed by pressing PICTURE on the remote control to directly toggle the modes.
Reset Resets the current
Picture Mode
setting to the default values.
32