Sony BRAVIA KDF-46E3000 Operating Instructions Manual page 45

9
Put the outside lamp cover back in its place.
Insert the two small tabs fiom the left side of
the outside lamp cover into the slots of the TV.
Push in the two larger tabs of the outside lamp
cover on the right side into the TV. The
outside lamp cover is securely closed alter
two clicking sounds are made.
10 Plug in the power cord. Turn on the TV and
set the Lamp Replacement option in the
General settings (see page 42). This setting is
necessary to inform you when the next lamp
replacement is needed.
• Until you set the Lamp Replacement option, a
message announcing that the lamp is at the end of its
life will appear every time you turn on the TV.
• Consult your Sony dealer for a Sony XL-2500
replacement lamp.
• Take great care when replacing the lamp or plugging
in/unplugging the connecting cords. Rough handling
may cause the TV to full, damaging the TV. the TV
stand and the floor.
The used lamp
For customers in the United States:
Lanlp in this product contains mercury. Disposal of
these materials may be regulated due to
environmental considerations. For disposal or
lecycling information, please contact your loc;fl
authorities or the Electronic Industries Alliance
(www.eiae.org).
[] Do not leave the used lamp near flammable
materials or within the reach of children.
[] Do not pour water onto the used lamp or put
any object inside the lamp. Doing so may
cause the lamp to burst.
O
o
For replacement lamp information visit:
U. S. residents:
http://www.sonystyle.eom/tv/
Canadian residents:
http://www.sonystyle.ea/tv/
45