1 Preparing the battery pack
_)lnsert
the battery pack into the battery charger.
• Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks.
OConnect
the battery
charger
to the wall outlet
(wall
socket).
The CHARGE lamp lights up, and charging starts.
When the CHARGE lamp turns off. charging is finished (Normal charge). Also, the CHARGE
lamp
may turn off when the temperature
is outside of the recommended
operating temperature
(10 to 30°C),
as the charger is on standby.
Charging
time
• The table
above
shows
the time required
to charge
a lully
depleted
battery
pack
at a temperature
of 25°C
(77°F).
Charging
may take
longer
depending
on conditions
of use and circumstances.
• See page
27 lot the number
of images
that can be recorded.
• Connect
the battery
charger
to the nearest
wall
outlet
(wall
socket).
• When
charging
is finished,
disconnect
the power
cord (mains
lead)
from
the wall outlet
(wall
socket),
and
remove
the battery
pack
from
the battery
charger.
• Be sure to use the battery
pack
or the battery
charger
of the gelmine
Sony
brand.
10