Warning Indicators And Messages - Sony Cyber-shot DSC-P200 User's Manual / Troubleshooting

Warning indicators and messages
If a code starting with a letter of tile
alphabet appears, your camera has a self-
diagnosis display The last two digits
/indicated by r-lr-ll will differ depending on
the state of tile camera
If you are unable to solve tile problmn even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32:r-lr_
• There is trouble _ith }our camera's
hardware Turn the power off and on
again
C:13: [][]
• The camera cannot read or write data on
the 'Memory Stick" Re-insm_ the
'_Memory Stick" several times
• An unff)rmatted "Memor? Stick" is
inserted Format the 'Memory Stick"
(page 48)
• The inserted Memory Stick" cannot be
used with your camera, or the data is
damaged Insert a new Memol 3, Stick"
(page 88)
E:61 : DD
E:gl :DD
•A camera malfunction has occurred
Reset the camera (page 74), then turn
the power on again
If the lk_llowing messages appear, follow
tile instructions.
Turn the power off and on again
•A problem with tile lens has caused an
erroE
•The battery le;el is low Charge Ihe
battery pack (_ *t{,t? l in "Read This
Fi_;,t") Depending on the conditions of
use or the type of battery pack, the
indicator may flash even though there
are still 5 to 10 minutes of remaining
batte W time left.
For "InfoLITHIUM" battery only
•The battery pack is not a
"InfoLITHIUM" type
System error
•Turn the power off and then on again
(_ step 2 "Read Tkis Fir,st').
No Memory Stick
•Insert a 'Memory Stick" (_ step 3
"Read Tkis First")
Memory Stick error
• Insert the _qMemory Stick" correctly
• The inserted 'Memory Stick" cannot be
used in your camera (page 88)
• The "Memory Stick" is damaged
• The terminal section of the Memory
Stick" is dirty
Memory Stick type error
• Tile insem:d 'Memo13 Stick" cannot be
used ill your camera (page 88).
g
85