Table of Contents
Advertisement
Preparationfor Use
Operation
described
in this manual
are
mainly
based
on the remote
control.
1
Turn on the TV and eet it to channel 3.
If channel 3 has been already occupied for broadcasting,
see "RF Output ChannM" section on page 6.
2
3
Select your language
in the first time you turn on this unit.
Then press [1_] to go to next step.
STANDBY-ON
re ., ost r u oSe Up.
i 1
_
...... UT
SET
............
To Preset the Channel Again
1)
Press
[MENU]
until the main
menu
appears.
2)
Select
"CHANNEL
SET UP" by using [AP_],
then press
[1_].
3)
Select
"AUTO
SET UP" by using [_./_'],
then press
[1_]. After
scanning,
the tuner stops
on the lowest
memorized
channel.
theOn-Screen lanuagLa_e
1)
Press
[MENU]
until the main menu
appears.
2)
Select
"LANGUAGE
SELECT"
by using
[A/_r],
then
press
[1_].
3)
Select
"ENGLISH",
"FRANCAIS"
or "ESPAIQOL"
by
using
[A/T]
then
press
[CLEAR/C.RESET].
If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [I_] and select
• ENGLISH. Finally, press [CLEAR/C.RESET].
To add or delete channels in this unit, [SKIPICH. Ip-I_IIA,kl_v]
button works
on he channel number memorized in his uM, [A/v] works on all.
Yes
Press [MENU] to exit.
, Refer to "Hint for Cable Box or Satellite Box" section on page 6.
V
No
Please wait for a few minutes. After scanning...
, The tuner stops on the lowest memorized channel
, You can select only the channels memorized in this unit by using
[SKIPICH. _!A,
I_1/_] (or [CHANNEL A/_]).
* If "AUTO SET UP" appears on the TV screen again, check the cable
connections.
Then, press [_]
once again.
Hint
, Repeat these steps oMy if either there was a power failure or this unit has been
unplugged for more than 30 seconds.
To Select a Channel
You can
select
a channel
by using
the Number
buttons
or
[SKIP/CH. _,'_VA, I__/T].
Notes
for
using
the
Number
buttons:
,,When
selecting
cable
channels
which
are higher
than
99,
enter
channel
numbers
as a three-digit
number.
(for exam-
ple:
117, press
[1],
[1], [7])
,,You
must precede
single-digit
channel
numbers
with
a zero.
(for example:
02, 03, 04 and so on)
3
1
Press [MENU] to select "CHANNEL
SET UP".
Then press [_]
to go to next step.
MENU
* If the clock ie net se£ the "CLOCK SET' ecreen appears when you press
[MENU]. In this case, preee [MENU] again.
2
Select
"MANUAL SET UP".
Then
preae [1_-] to go to next step.
Select the channel to be added or deleted.
MANUAL
SET U P
4
_or_
or _or_
Select "ADD" or "DELETE".
To exit the menu
CL EAR,'
C RESET
MANUALSET UP
1
Press [MENU]
and select "CLOCK SET".
Then press [1_] to go to next step.
MENU
, If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
2
Select the current month.
Then press [1_] to go to next step.
3
Select the current day.
Then press [1_] to go to next step.
4
Select the current year.
Then press [1_-] to go to next step.
Select the current hour.
Then press [1_] to go to next step.
/
Select the current minute.
Then press [1_,-]to go to next step.
7'
Select "AM" or "PM".
q::>or q:>
8
To exit the CLOCK SET screen
I To go back one step, press [_] (during steps 2 to 7).
* Your clock setting will be lost if either there is a power failure or this unit has
been unpugged or more than 30 seconds.
EN
Hide quick links:
Advertisement
Table of Contents
