Troubleshooting Guide - Magnavox MWD2206 Owner's Manual

1 Press [SETUP] in the
stop mode.
<SETUP MENU>
2
Select "INITIAUZE".
ENTER
0
EN_I 4 TO exit themenUsETUP
ress
Troubleshooting Guide
If this unit does not perform properly when operated as instructedin this Owner's Manual, check this unit consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power. , Make sure the power plug is connected to an AC outleh
° Make sure the power is turned on.
This ung does not , Check mf t he powel plug is connected to an AC outlek
respond to the remote , Check tile batteries in the remote control
control ° Aim the rer//ote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control
° You have to be within 23 feet (7rn) of this unit.
° Check if the right mode is selected. If it's not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control
, Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn tile volume up, then If you hear some signal sound from tile radio
in response to your presshlg buttons on the remote control, the remote control is working.
Poor picture or noise. , Irlterference signal may be receNed. Change tile position and orientation of the unit.
Timer recording is impos = , Make sure the Timer Recording is set correctly.
siMe. , Make sure TIMER REC indicator on the front panel IigMs up. if not, press [SUBTITLE/T-SET].
, Make sure the VCR clock is set correctly.
Cannot go into record , Make sure tile tape has a record tab. If needed, cover the hole with adhesive tape.
mode. , Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT IigM is lit.
Playback pictu re is paifially , Adjust tracking control for a better picture by pressing [CNANNELV/,_,.] on the unit or [SKJP/CN. _',_-I/,_,., I_I_/T] on the remote corltrol.
noisy.
Cannot view a tape but , Head cleaning may be necessary. Refer to "AUTO HEAD CLEANING".
the audio is OK. , Make sure the VCR is not in the Menu mode.
<
O No or poor, playback , Change If'le RF output ctlannel to CH4. Then select tile same chanrlel on the TV.
picture. , Fine tune your TV.
TV programs cannot be , Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
seen normally. , Press [VCR].
, Press [VCR] on the remote control to activate it in tile VCR mode. Check If the VCR OUTPUT light is lit, then set it to the TV position by press-
ing [VCR].
Vide() or color fades in ° You cannot copy a copyrighted video tape. You are experierlcing copy guard protection.
and out when making a
copy of a video tape.
Cannot remove the tape. , Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
No picture. , Connect tile video cable firmly.
, Insert a correct video disc that plays on this unih
, Press [DVD] on the remote control Check If the DVD OUTPUT light is lit. Then try other DVD features.
Disc cannot be played. , Insed the disc.
, Clean tile disc.
, Place the disc correctly with tile label side up.
, Cancel the parental lock or change the control levels.
, Handle a disc with special care so that it does not have firlgerprirlts, scratches, or dusts on itssurface.
No sound. , Connect the audio cables firmly.
, Turn the power of the audio component on.
, Correct tile audio output settings.
, Correct the input settings on the audio componenh
Distorted picture. , Connect this unil directly to the TV.
'<_ ° There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
° Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language , The selected larlguage is not available for audio or subtitles on tile DVD.
does not match the setup. -This is not a malfunction.
The camera angle cannot , The DVD does not contain sequences recorded from different camera angles.
be changed. -This is not a malfunction.
Audio or subtgle language , The DVD does not contain audio source or subtitles in the selected language.
cannot be changed. -This is not a malfunction.
"Prohibged icon" appears , That operation is prohibited by this urlit or the disc.
on the screen, prohibiting -This is not a malfunction.
an operation.
Some functions are not availabb in @ecific modes, but thb is not a malfunction. Read the description in this Owner's Manual for details on correct operations.
• Playback from a desired track and random playback are not avaibbb during program playback.
• Some functions are prohibited on some discs.
- 23 - EN