Advertisement
--REAR
VIEW-
22
23
24
25
1
@
_OEO
T
o .00,..0 =
!
26 2728 29
9. Remote sensor window- Receives
the infrared
17. SLOW button- Press to start slow motion playback.
signals from the remote control.
10. Indicators
POWER indicator- Indicates
that the power
is
turned on.
VCR/TV indicator-
Indicates that the VCR is in the
VCR position.
TAPE IN indicator-
Indicates that there is a tape in
the VCR.
TIMER indicator-
Indicates that the timer recording
or OTR has been set.
RECORD indicator-
Indicates
that it is recording.
Flashes when a recording has been paused.
The slow speed can be controlled
by pressing the
F.FWD
button
(faster)
or REW(IND)
button
(slower). (only on the remote control)
18. QUICK-FINDbutton- Quick Find mode. For more infor-
mation, please read page 23. (only on the remote control)
19. SEARCH buttons
TIME SEARCH button-
Time Search mode. For
more information,
please read page 23. (only on the
remote control)
INDEX SEARCH button-
Index Search mode. For
more information, please read page 22. (only on the
remote control)
11. TAPE SPEED button-
Press to choose the desired
20. COUNTER MEMORY button-
Press to set counter
recording speed : SP/SLP. (only on the VCR)
memory on and off.(only on the remote control)
12. CHANNEL A or •
buttons-
Press to select the de-
21. COUNTER RESET button-
Press to reset counter
sired channels for viewing or recording.
Tracking function- Press to minimize video 'noise'
(lines or dots on screen) during playback
or slow
mode.
Press to stabilize the picture in the Still mode when
the picture begins to vibrate vertically.
13. RECORD button- Press for manual recording.
to 0:00:00.
(only on the remote control)
EXIT button- Press to exit the menu on the TV
screen. (only on the remote control)
22. Power cord-Connect
to a standard
AC outlet
(120V/60Hz).
23. AUDIO OUT jacks-Connect
to the audio
input
jacks of your audio equipment
or another VCR.
OTR button-
Press to activate One Touch Record-
24. AUDIO IN jacks-
Connect to the audio output jacks
ing. (only on the VCR)
of your audio equipment or another VCR.
14. MENU button-
Press to display the menu on the TV 25. ANT. IN terminal-
Connect
to an antenna,
Cable
screen. Press to exit the menu on the TV screen,
system or Satellite system.
15. NUMBER buttons-
Press to select desired channels
26. VIDEO OUT
lack-
Connect to the video input jack
for viewing or recording. To select channels from I
of your video camera or another VCR.
to 9, first press "0" button then 1 to 9. (only on the
remote control)
2'7. VIDEO IN jack- Connect to the video output jack of
+100 button-
When selecting cable channels which
your video camera or another VCR.
are higher than 99, press this button first, then press
28. CH3/CH4 selector
switch-
Use to select
a video
the last two digits. (To select channel 125, first press
output channel (3 or 4) for VCR playback,
"+100" button then press "2" and "5"). (only on the 29. ANT. OUT terminal-
Connects to the antenna input
remote control)
terminal on your TV.
16. DISPLAY button-
Press to display
the counter
or
the current channel number and the current time on
the TV screen. (only on the remote control)
- 9-
EN
9J27
Advertisement
