Advertisement
If your TV does not have A/V terminals:
When the VCR is in the Playback mode or when the
VCR is in the VCR position, your TV will receive sig-
nals from the VCR on either channel 3 or 4.
To use the VCR with your TV, set the selector switch to
CH3 or CH4 (which is located in the back of your VCR).
whichever
is not used for normal broadcasts
in your
area. Then set your TV to the same channel.
[Back of the VCR]
CO _Al'(77\(;
TO LVP_ T I._ (7_,_
When you copy a video tape, or watch a program
re-
corded on an another source, use the audio/video
input
jacks on the VCR.
• When you connect a monaural VCR (another source)
to this VCR, connect the Audio output jack of the
monaural VCR (another source) to the AUDIO IN L
jack of this VCR. The audio signal will be recorded
in both L and R channel equally.
USING THE REAR JACK:
[ Fi9-7:
To the audio
output jack
[Back of the VCR]
[Another source]
"
AUDIO
Audi
cables
IOlff
IN [
(notsop#eft
_
etc.l
t
_
O@U_
To theVideo,,
output jack
USING THE FRONT JACK:
You can use the audio and video input jacks on the front
panel of the VCR instead of using the jacks on the back.
INPUT
SELECT
OF FRONT
OR REAR
To use the audio/video
input jacks, select the "Lineln
Rear (L I)" or "Lineln Front (L2)" position.
I ) Be sure to check that the POWER and the VCRFFV
indicators are both on.
2) Turn on the TV and set the TV to channel 3 or 4. Now
set the CH3/CH4
switch on the back of the VCR to
match thc channel selected on the TV.
3)
4)
Connect the audio/video
cables to the audio/video
input jacks on the back of the VCR. Now connect the
other end of the cables to the audio/video output jacks
on the source.
-13-
• If you use the audio and video input jacks on the
back of the unit, press 0, 0, 1 on the remote control
to select the "Lineln Rear (L I)" position.
• If you use the audio and video input jacks on the
front of the unit, press 0, 0, 2 on the remote control
to select the "Lineln Front (L2)" position.
You may also select
the "LineIn
Rear (LI)"
or
"Lineln Front (L2)" setting by pressing the CHAN-
NEL • Or • button.
Notes:
• When the TV screen displays "Lineln Rear (L1)" or
"Lineln Front (L2)", its background
will be blue.
• "Lineln Rear (LI)" or "Lineln Front (L2)" is found be-
fore the lowest memorized channel. (Example: CH2)
(L\ X!'(_!ING
t'_) Ot Tt'I I'JACKS
lf your TV has A/V input jacks,
You may connect your VCR's AUDIO/VIDEO
OUTPUT
jacks to the audio/video input jacks on back of your TV.
Direct audio/video connections
usually result in a better
picture and sound quality for tape playback. Please see
your TV's owner's manual for A/V input connections.
I Fi9.8:
I
[Back d rneVCR]
--i_JOlO
OtO
i_dloNideo cables
OIIT
IN
I ) Open the battery compartment
cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery com-
partment
in the direction
indicated by the polarity
(+/-) markings.
3) Replace the cover.
EN
9J27
Advertisement
